Electroplating equipment to enhance the level of compressive strength of plastic parts, according to the addition of tiny particles to make the raw material chemical fibres to reduce or particulate doping, resulting in high toughness polymer materials, in addition to grasp the good plastic plating parts passivation treatment before the process processing
Author: Robby
Electroplating equipment to enhance the level of compressive strength of plastic parts, according to the addition of tiny particles to make the raw material chemical fibres to reduce or particulate doping, resulting in high toughness polymer materials, in addition to grasp the good plastic plating parts passivation treatment before the process processing, can be received satisfactory practical results. Plastic plating equipment on the type of plastic, modelling design, manufacturing and processing technology are clearly put forward high provisions. At this stage, the key types of plating plastics are ABS, polypropylene and polyester, etc., in which ABS plastic is widely used, and the actual effect of plating is. Full consideration of unsuitable modelling design will lead to product workpiece part of the stress and reduce the coating bonding, the provisions of plating plastics should prevent large-scale planograms, and need to round off all the edges and corners, in addition is not suitable for too thin, thin and thick do not have to have a gene mutation, to ensure that the quality of the coating. Because the plastic parts after plating surface shortcomings will become more and more eye-catching, and thus the surface smoothness of the mould shell provisions are very high, metal drawing, spinning, trimming, sandblasting treatment and other decorative design of the actual effect will have to be done in the mould shell to go out, the product workpiece injection molding process generally do not need to release the film agent, in order to better out of the mould is convenient, the mould shell should be according to the mould orientation of the production and processing to a certain degree of inclination. Taking into account the plastic is a conductive medium, not immediately and gradually plating, be sure to use the stacking of conductive ceramic film will be transformed into a conductive negative.
Plating equipment plating the whole process of how to reduce power consumption, reduce production costs, enhance the company's electroplating production and processing of competitive ability, in today's market economy system standard looks more and more critical. The definition of electroplating current efficiency has a very important meaning in life practice, and the improvement of current efficiency can save electricity. The current efficiency of various plating processes varies greatly. Under the condition of reaching the technical standard of the commodity, we should select the plating process with high efficiency to save the cost of the product. Such as the selection of rapid chrome plating process, its environmental protection and energy saving is very significant, in addition to saving the centrifugal fan energy, and reduce industrial emissions.