How Can We Control the Feeding Amount of Pellet Machine?

We all know that the pellet machine feeding requirements for uniform speed, and the amount of feed and equipment rated capacity to match, to let the pellet machine achieve the best production state.

 

We all know that the pellet machine feeding requirements for uniform speed, and the amount of feed and equipment rated capacity to match, to let the pellet machine achieve the best production state. If the feeding speed is too fast, it will cause the machine load to increase, the energy consumption increases, and the current becomes larger, which will lead to the blockage of the feeding port to cause a boring machine. While the feeding speed is too slow will cause capacity reduction, and waste of energy, so the uniform amount of feed is also the key to controlling the production of pelleting. If you hope to make the Europe CE Particle Filtering Half Mask / FFP2 Protective Face Mask play the maximum benefit, it is recommended to strictly control the feeding from the following points:

 

 

1. Control the temperature of the pellet machine. If the temperature is too high it will lead to raw material burning or caking, and if too low, it will affect the degree of maturation.

 

2. If the raw material is too wet which will lead to its agglomeration, moisture absorption after the softening of the particles makes it easy to stick, we should control the moisture content of the raw material, the water content of the material more sun, drying and other treatments, so as not to adherence to the material in the interior wall of the granulation chamber.

 

3. The transmission efficiency of the deceleration mechanism affects the size of the production efficiency of the pellet mill equipment, when the transmission efficiency is low, the actual power of the equipment will be reduced. When designing the transmission system of the pellet machine, the actual useful power of the pellet machine can be increased by improving the efficiency of the transmission system to achieve the purpose of energy saving and consumption reduction.

 

4. Prohibit the entry of too-hard materials, while the production of non-crushed material should be strictly prohibited from entering the granulation chamber.

 

5. Control the composition of the particle size of the material, prohibit the entry of oversized materials, should be screened in advance.

 

 

6. Reasonable setting of working parameters. The working parameters of the granulator have a direct impact on the movement characteristics of the material, which in turn has an important impact on the production efficiency of the equipment. To improve the production efficiency of the equipment, generally, improve the design of the pellet machine pressure rollers and molds, and according to the pressure rollers and molds that have been improved, equipped with the best working parameters, to make the molds match with the material so that the production efficiency of the equipment is maximized.

 

7. Feeding should be done after its normal operation and then slowly increase the feeding speed to make it reach a stable production efficiency. If a large amount of feeding when the pellet machine starts, it will cause the vibration of the whole pellet machine, and in serious cases, it will also cause the breakage of the safety pin of the equipment. The control of feeding quantity can be increased with a frequency conversion feeding device to ensure the uniformity of feeding.

 

According to our production of pressure roller ring die years of experience concluded that the pellet machine is concerned about the stability of production, we also need to master the key points of the operation of the equipment, to be able to comply with the needs of the pellet machine, so that the pellet machine for us to work better.